SPEP panel Water tank - Product

 Gyeongsangbuk-do  -  South Korea
SPEP panel Water tank
  • SPEP panel Water tank
*Economicla and exceptionally innovative product that remedies the shortcomings of existing products
*Hygienic and harmless to humans, eco-friendly product
*Combination of the strong chemical resistance of the inner PE part and the structural stability of the outer STS
*Semi-permanent life-span (STS gives semi-permanent protection

Our recommended products and services

Tank sterilizer

These systems are used in the fruit juice, milk and pharmaceutical industries. For new tanks we offer sterile air units, which are matched by parameters to the size of tanks. We manufacture units as stationary or mobile equipment. The solutions applied by us maximally shorten the time of servicing, enabling sterilization of two tanks at the same time. Operation: Aseptic tanks are filled with hot steam for sterilisation. Once the steam supply stage of the process finishes, the steam must be ejected from the tank using cold sterile air in order to prevent the tank from collapsing as a result of negative pressure. Without the cold blowing process, the steam inside the tank would quickly condense on the cold tank walls and the tank would be crushed like a paper bag. This process is known as “vacuum collapse”, and is caused by the fact that the volume of hot steam is approx. 1,700 times greater than that of the water from which it is produced. Our cold blowing unit quickly removes steam using sterile air and so safely prevents vacuum collapse. Another task of the system is to filter the steam and the sterile air. The steam must not carry any rust-inducing particles, while the air must be kept free from fungi, yeasts, bacteria and other micro-organisms. For this reason, the steam is filtered with a 10-100 μm filter mesh and the sterile air with an approx. 0.2 μm filter mesh. The B&P Engineering unit can be used with two tanks at the same time. One tank is sterilised with hot steam, while the other one is undergoing the cold blowing process.

Description of the Product

*Economicla and exceptionally innovative product that remedies the shortcomings of existing products 
*Hygienic and harmless to humans, eco-friendly product
*Combination of the strong chemical resistance of the inner PE part and the structural stability of the outer STS
*Semi-permanent life-span (STS gives semi-permanent protection to PE which is weak against UV rays)
*Dual waterproof (Double protection against chemical leak, separtate total welding of both STS and PE)
*Large capacity tanks possible through STS welding enhanced structural body
*Structural Stability: Secured structural stability through combined STS part welding
*Maintencance is easy and inexpensive (Defective area PE fusion, simple repair)
*Perfect waterproof construction(Spark tester equipment)
*Excellent ecomomic feasibility(Almost the same as existing PE, FRP tank construction cost)
*Excellent thermal effect by installing external thermal material
*Extensive Use: Usable from filtration plant, tap water, and chemical storage tanks to waste storage

Price of the Product

Price not indicated

Ask for information