Marine Pump of SHIN SHIN MACHINERY

Product

1. MSC
CENTRAL COOLING F.W.

Usage and Application
  • CENTRAL COOLING F.W. PUMP
  • JACKET COOLING F.W. PUMP
  • F.W. GENERATOR EJECTOR PUMP
  • AIR COND. COOLING F.W. BOOSTER PUMP

Features
  • Dynamically balanced impeller
...

Our recommended products and services

HAND MORTAR PUMP

BM-13300012 / HAND MORTAR PUMP, MODEL 1 BM-13300016 / HAND MORTAR PUMP, MODEL 2 BM-13399915 / HAND MORTAR PUMP, MODEL 3 BM-13300010 / HAND MORTAR PUMP, MODEL 4 BM-13300011 / HAND MORTAR PUMP, MODEL 5 Hand mortar pumps are small but strong helping tools for all mortar works in smaller quantities. Mortars/grouts up to 4 mm grain size. Hand mortar pumps can be used without electricity: for cavity filling, low-pressure injection, for joints, filling mortar into door or window frames, for anchor holes, pumpable mortars/grouts up to 4 mm grain size (model 1-5), and much more.The inner sealing set ensures a leak free over head working. The mixed material is sucked into the hand mortar pump by pulling the trigger back and now is the hand mortar pump ready to work. Application areas: Working with mortar/grouts up to 4 mm grain size filling door or windows frames cavity filling working with filler plasters, renders concrete cosmetics fire protection mortar mortar/grouts for frames BM-13300016-GK / HAND MORTAR PUMP, MODEL 6 BM-13300016-GK10 / HAND MORTAR PUMP, MODEL 7 Application areas: Working with thin mortar/grouts,water tight mortars, mineral suspensions. filling hollow spaces concrete cosmetics frame mortars / grouts swelling mortars Injections crèmes and much more BM-13300019 / HAND MORTAR PUMP, MODEL 8 Application areas: Working with thin mortar/grouts up to 2 mm grain size filling spacer holes filling anchor holes joint mortars/grouts Injection crèmes and much more BM-13300020 / HAND MORTAR PUMP, MODEL 9 BM-13300021 / HAND MORTAR PUMP, MODEL 10 Application areas: Our proven and well known hand mortar pumps with GEKA connection. Working with thin mortar/grouts,mineral suspensions. filling mortar in hollow spaces joint mortar frame mortar/grouts filling mineral injection mortars/grous and much more. BM-13300001 / HOSE FOR HAND MORTAR PUMP BM-13300002 / HOSE FOR HAND MORTAR PUMP Hose DN 13 - GEKA for hand mortar pump. Hand mortar pumps can be used without electricity: for cavity filling, low-pressure injection, for joints, filling mortar into door or window frames, for anchor holes, pumpable mortars/grouts, and much more. The inner sealing set ensures a leak free over head working. The mixed material is sucked into the hand mortar pump by pulling the trigger back and now is the hand mortar pump ready to work.

Description of the Product

1. MSC
CENTRAL COOLING F.W.

Usage and Application
  • CENTRAL COOLING F.W. PUMP
  • JACKET COOLING F.W. PUMP
  • F.W. GENERATOR EJECTOR PUMP
  • AIR COND. COOLING F.W. BOOSTER PUMP

Features
  • Dynamically balanced impeller
  • Application of high reliability line bearing
  • Easy to maintenance
  • High efficiency
  • Low NPSH & noise, vibration
  • Gland packing or mechanical seal

2. MB
BOILER FEED WATER

Usage and Application
  • FEED WATER PUMP FOR AUX. BOILER & EXHAUST

Features
  • The suction branch can be led to the right, to the left or upwards
  • The impeller followed by diffuser maximize the efficiency of pump
  • The axial thrust caused by the single-entry impeller is absorbed by balance drum and drum liner
  • Tie bolt hold together suction, discharge, stage casing which are sealed up by O-ring.

3. AC
SLUDGE PUMP (MONO TYPE)

Usage and Application
  • Sewage treatment
  • Sludge pump
  • Bilge pump

Features
  • Easily conveyable high viscous and high dense material
  • Uniform, non-pulsating flow
  • High suction capability
  • Vulcanized-in, Easily replaceable stator, Corrosion-proof, therefore a Long service life
  • Single stage up to 6 bar
  • Double stage up to 12 bar
  • ·Four stage up to 24 bar

Price of the Product

Price on request

Technical Details

1. MSC
Specification
·Capacity : 30 m³/Hr ~ 650 m³/Hr
·Head : 10 m ~ 65 m
·Suction Dimension : ø50 mm ~ ø250 mm
·Rotation Direction : CW

2. MB
Specification
·Capacity : 0.2 m³/min ~ 150 m³/min
·Head : 18 m ~ 450 m
·Temperature : -20 ℃ ~ 180 ℃
·Suction Dimension : ø50 mm ~ ø100 mm
·Rotation Direction : CW

3. AC
Specification
·Capacity : 1 m³/Hr ~ 75 m³/Hr
·Diff. Press. : 1 Kg/㎠ ~ 24 Kg/㎠
·Temperature : 0 ~ 80℃
·Suction Dimension : ø40 mm ~ ø125 mm
·Rotation Direction : CW

* The out of the above range can be supplied according to customer's order placement.

Ask for information

3   products -