DP 10 TEN-FUNCTION AEROSOL FREES SEIZED PARTS

TEN-FUNCTION AEROSOL FREES SEIZED PARTS
NSF H1 CERTIFICATION FOR FOOD INDUSTRY USE
READILY AND FULLY BIODEGRADABLE
CEC L33 T82, OCDE 301 A
PENETRATES, FREES UP SEIZED PARTS, DEOXIDISES, LUBRICATES, PROTECTS AGAINST CORROSION
CLEANS, DEGREASES, DILUTES, CLEANSES, PREVENTS ADHESION
REMOVES TAR, REMOVES BITUMEN, LUSTERS ELASTOMERS
 iBiotec DP10 PENETRATING AEROSOL
 
 
DESCRIPTION
Deoxidizing, lubricant, tar remover.
Clean, colourless, free from silicone, free from orthophosphoric acid and chlorinated solvents.
Eliminates rubber coating, light or heavy hydrocarbons.
This product, based on vegetal natural esters, is neutral.
It does not have any photochemical reactivity.
Very low surface tension.
This product is compatible with all plastic materials and elastomers. It does not affect paints.
 
APPLICATIONS
Bolt and screw manufacture, pot type joints, needles, swivels,
boulons, electromechanical contacts, hinges, guides, slides,
telescopic antennas, chain degreasing.
 
USE FIELDS
Mechanical industries. Maintenance workshops. Automobile aftersales.
Agricultural industries and farmings. Transport materials. Cement plants.
 
MORE ECONOMICAL
Apart an obvious risk, from a safety point of view, the quantities of Butane-Propane implemented in an aerosol, are largely higher than those of a compressed gas such as CO2. It results from it, despite a net volume of more important filling, a weaker quantity of active ingredient.
 
MORE EFFICIENT BECAUSE…
More protective
DP 10 shows that its protective film is able to act as efficient “protective oil” which stops and prevents for a long time formations of rust and oxidation.
 
It results from these tests:
- a facilitated releasing of assemblies, tools and machine elements;
- an effective penetrating power, when it is used in assembly;
- a better conservation of pieces even under aggressive conditions, such as in maritime transport.
 
More penetrating, anti wear
FRICTION RATIO ACCORDING
TO SRV FRICTION TEST
The friction test SRV makes it possible to determine a friction ratio ; the more friction ratio is low :
- the more power consumption is low
- the more efforts of disassembling are weak
- the more noises of operation are reduced.
 
Such as we can see it on the opposite graph, DP 10 ensures an extremely weak and particularly constant friction ratio.
The line drawing shows the absence of peaks, which indicate the problems of seizing between surfaces. The same peaks for a standard penetrating fluid and a “high quality” penetrating fluid slightly highlight the very weak power of some penetrating fluids.

MORE ECOLOGICAL
DP 10 is based on vegetal origin esters. It results a completely biodegradable product according to OCDE criteria :
Easily biodegradable according to OCDE 301B test (follow up of CO2 emission during dissipation). Completely biodegradable according to OCDE 302C test (manometric follow up during dissipation). Moreover, DP 10 is totally free from compounds classified dangerous for environment. It has a vapour tension less than 0,1 hPa at 20°C : it is totally free from VOC.
 
NOT DANGEROUS FOR HEALTH
DP 10 is guaranteed without chlorinated solvent such as PER, TRI and methylene chloride, which are classified cancerogenic.
It is completely free from aromatic compounds or benzene compounds.
Formulated on vegetal base, it is not classified dangerous for health, according to CE criteria (non irritating, not damaging, not sensitizing, not CMR, not toxic…)
Easy to use, it does not issue steam and is practically odourless.
 
DIRECTIONS FOR USE
Shake the aerosol briefly. Spray without excess onto the surfaces to be disassembled or treated. Aerosol usable in any position.