Executives - Epidor Buy the executives list from same sector
Sr. Antonio Cammany Dorr
MD/Chief Operating Officer (Administrador)
Location - Epidor
Key figures - Epidor
Turnover
Activities - Epidor
Main activities within the Kompass classification
- Plastic products, insulating
-
Jointings, packings and gaskets, plastic
- Gaskets, ethylene-propylene-diene monomer (EPDM)
- Gaskets, polyethylene (PE)
- Gaskets, polytetrafluoroethylene (PTFE)
- Gaskets, polytetrafluoroethylene (PTFE) filled
- Gaskets, polyvinyl chloride (PVC)
- Gaskets, plastic, for glazing and draught-proofing
- Gaskets, plastic, for plate heat exchangers
- Gaskets, synthetic fibres and nitrile rubber
- Gaskets, plastic, electromagnetic interference (EMI) and radio frequency interference (RFI) shielding, for electronic equipment
- Packing rings, plastic
- Packing rings, vee type, plastic
- Packings, polytetrafluoroethylene (PTFE)
- Oil seals, plastic or synthetic rubber
- O-rings, polytetrafluoroethylene (PTFE)
- Piston rings, plastic, high temperature resistant
- Seals, filled polytetrafluoroethylene (PTFE)
- Jointing materials, plastic
- Plastic products, industrial use
Secondary activities within the Kompass classification
- Plastic products for the electrical and electronics industries
- Rubber tubes and flexible hoses
- Rubber tubes and flexible hoses, by use
- Profiles, blocks, rollers and bearings, rubber
- Rings and washers, rubber
- Plastic products for the electrical and electronics industries
- Boxes, metal, for packaging, transport and storage
-
Screws, non-turned, metal
- Screws, steel, non-turned
- Screws, stainless steel, non-turned
- Screws, non-ferrous metals, non-turned
- Screws, metal-plastic, non-turned
- Screws, tungsten tipped, non-turned
- Screws, die-cast
- Screws, hot stamped
- Screws, cold stamped
- Screws, cold forged
- Screws, non-turned, plated
- Screws, bolt head, non-turned
- Screws, socket head, non-turned
- Screws, flat head, non-turned
- Screws, pan-head, non-turned
- Screws, cross-headed, non-turned
- Screws, countersunk, non-turned
- Screws, plastic headed, non-turned
- Screws, cheese-head, non-turned
- Screws, socket shoulder, metal, non-turned
- Screws, self-tapping, non-turned
- Screws, self-locking, non-turned
- Screws, multiple thread, non-turned
- Screws, trapezoidal thread, non-turned
- Screws, headless, metal, non-turned
- Set screws, hexagonal, square
- Set screws (grub screws)
- Screws, metal, high strength, non-turned
- Worm screws, non-turned
- Screws, socket cap and cap screws, non-turned
- Machine screws, non-turned
- Screws, dry lining, non-turned
- Chipboard screws (twin-thread screws)
- Screws, dowel, non-turned
- Screws, hammer driven, non-turned
- Screws for metal, non-turned
- Screws for wood (woodscrews), non-turned
- Screws, metal, non-turned, for agricultural machinery and equipment
- Screws, clamping, metal, non-turned, for machine tools
- Screws for workbenches, wing-nuts, screw-clamps, non-turned
- Screws for roof coverings and cladding, non-turned
- Screws, steel, non-turned, for surgical instruments
- Screws, furniture, non-turned
- Decking screws, metal, non-turned
- Eye screws and hooks, non-turned
- Screws, metal, non-turned, for plastics and soft materials
- Screw and washer assemblies, metal, non-turned
- Screws, metal, non-turned, to customer specification
- Bolts , metal, non-turned
- Files, rasps and similar tools
-
Bearings and pillow blocks, mechanical
- Bearings, ceramic
- Bearings, bimetal
- Bearings, plain, copper lead
- Bearings, plain, bronze
- Bearings, plain, gunmetal
- Bearings, plain, white metal
- Bearings, plain, phosphor bronze
- Bearings, plain, aluminium
- Bearings, plain, ceramic
- Bearings, high strength, aluminium silicon
- Bearings, graphite impregnated
- Bearings, precision
- Bearings, precision, micro
- Bearings, wire race
- Bearings, hydrodynamic
- Bearings, hydrostatic
- Bearings, pneumatic
- Bearings, gas or air lubricated
- Bearings, metal, self-lubricating
- Bearings, water lubricated
- Bearings, metal, fluid film
- Bearings, dry lubricated
- Bearings, metal, corrosion resistant
- Bearings, metal, thin wall
- Bearings, metal, thick wall
- Bearings, metal, spherical, self-aligning
- Bearings, pivotal
- Plummer blocks, metal
- Plummer blocks, ball or roller bearing
- Pillow and flange blocks for tapered roller bearings
- Sliding bearings, metal, load supporting
- Bearings and pillow blocks, mechanical
- Bushings for ball roller bearings
- Ball and roller bearing components NES
- Gear cutting machines
-
Tools for chip removing machine tools, metalworking
- Tools, polishing machine, metalworking
- Tools, lapping machine, metalworking
- Tools, honing machine, metalworking
- Tools, planing machine, metalworking
- Tools (files), forming machine, metalworking
- Tools, sharpening machine, metalworking
- Roller units, threading, metalworking
- Drill bits, countersink, metalworking
- Jig bushings, drill bushes, standardised, metalworking
- Broaches, machine tool
- Taps, threading, for machine tools
- Chasers, circular, metalworking
- Chasers, tangential, metalworking
- Chasers, radial, metalworking
- Dies, threading
- Drill bits, twist, metalworking machine tool
- Drill bits, morse taper
- Drill bits, centre
- Drill bits, spade
- Drill bits, worm pattern, metalworking
- Drill bits, form, metalworking
- Drill bits, carbide and hard metal tipped, metalworking
- Drill bits, oil-hole type
- Core drills, metalworking
- Drill bits, deep hole (gun drills), metalworking
- Reamers, adjustable, metalworking
- Reamers, morse taper, metalworking
- Reamers, carbide tipped
- Reamers, with combined drill, metalworking
- Reamers, cobalt, metalworking
- Reamers, down cutting, metalworking
- Drill bits, metalworking, to customer specification
- Reamers, metalworking, to customer specification
- Machinery and equipment for the textile industry NES
- Building machinery and equipment NES
Other classifications (for some countries)
CNAE (ES 2009) : Comercio al por mayor no especializado (4690)
NACE Rev.2 (EU 2008) : Non-specialised wholesale trade (4690)
CNAE (ES 2025) : Comercio al por mayor no especializado (4690)
ISIC 4 (WORLD) : Non-specialized wholesale trade (4690)
NACE Rev.2.1 (EU 2025) : Non-specialised wholesale trade (4690)
Follow us - Epidor
| Discover more on our Website |
|---|
Kompass membership
| Kompass ID? | ES1040313 |
|---|
Legal information - Epidor
| Type | Secondary establishment : Branch |
|---|---|
| Headquarters | Epidor, S.A. |
| Year established | 1965 |
| Legal form | Information available as an option |
| Activity (CNAE09) | Comercio al por mayor no especializado (4690) |
| Corporate capital | 402,678 EUR |
| Registration No. | Information available as an option |
| VAT no |
Information available as an option
|
| No employees | 50-99 Employees |
General Information - Epidor
| Certifications |
|
|---|
Other Companies recommended by Kompass:
Looking for new B2B Leads ?
Purchase a Company list with the executives and contact details
You might also like:
Need help finding the right information ? Let us guide you to the best solutions !
I am looking for :
The shortest path to your future customers and suppliers
"I would recommend EasyBusiness to all sales teams."
Test EasyBusiness for 14 days for free
No payment or credit card required
All-in-one prospecting solution designed to improve your productivity
Find your next customer today! Your shortcut to faster, more targeted and successful lead generation
Register for free and turn reliable data into real business opportunities
Your data is used to recontact you or send you communications and may be processed by Kompass, for the purposes of legitimate interest (Article 6 1.f of the GDPR).
You may object to its processing by email: dpo@kompass.com.
Find out more: see our privacy policy.